Settings for compartment
The UltraPhase 2 values are pre-set in
the standard settings.
After the cartridge has been pushed in,
the display message switches to:
Agent for
Confirm with the OK sensor button.
Miele UltraPhase 2
Confirm with the OK sensor button.
The dispensing quantity for
UltraPhase 2 for (hardness level I)
is pre-set.
Per load
Confirm the pre-set value with the OK
sensor button or correct the value
with the sensor buttons and
confirm this with the OK sensor
button.
UltraPhase 2
Hardness level I
Hardness level II
Hardness level III
Before using for the first time
OK
OK
36
ml
OK
36 ml
45 ml
54 ml
The following will appear in the display:
Insert
Remove the stopper from the
detergent cartridge.
Push the UltraPhase 2 detergent
cartridge into compartment until
it locks into position.
When the cartridge is pushed in, the
display message switches to:
"TwinDos" set. Can be changed in
"Settings".
Confirm with the OK sensor button.
Close the TwinDos flap.
21