Connecting Peripheral Equipment - Tesla 32K307BH Operating Instruction

ENG
Mount on the wall
Obstructs the air circulation
• Do not place the TV set in an area with mechanical vibrations.
• Do not place the TV set in an area where insects may enter.
• Do not mount the TV set against air conditioner as internal panel of the display can condense and cause failure.
• Do not place the TV set in an area with strong magnetic field as electromagnetic waves can interfere with it and
damaged it.

Connecting peripheral equipment

You can connect various devices to the TV set and view high quality images. If a video device has HDMI, AV, PC and
other output/input ports, select one of them and connect to the corresponding input or output ports of the TV set. After
connecting it, press the "SOURCE"" key and signal source menu will be displayed on the screen. Press "
to select the input signal and press "OK" key to confirm. The connecting mode is shown in the figure.
Remarks:
1. After connecting to equipment with MHL function, please select HDMI1 as input signal source.
2. ARC function is optional, please refer to the device.
3. COMPONENT interface is optional, please refer to the device.
4. If there is a COMPONENT interface, component and AV share AUDIO-IN interface.
5. The peripheral equipment and cables described in this manual should be purchased separately.
• Please keep the minimum space around the
TV as shown in the figure.
• Do not cover air vents or insert any objects
Wall
into the enclosure.
• Do not put the device in limited space, e.g.
bookcases or embedded closets, unless the
TV set is properly ventilated.
TIPS ON INSTALLATION
Mount on the base
Ventilation
4
Obstructs the air circulation
Wall
" and " " key