Fujitsu DESKPOWER 5000 Series User Manual page 83

Point
- Set "Wake up on PCI PME" to "Enabled" in case of using the LAN card compliant with PME.
- Turn off the power from OS menu beforehand in case wake up on LAN is done.
– Wake up on Modem Ring
This item sets whether to turn on the computer or to return it from Standby mode when a call
terminates on the modem connected to a serial port or on the modem card (PCI) connected to
the RI cable.
- Disabled (Initial value)
The computer is not turned on or returned from Standby mode when a call terminates on
the modem.
- Enabled
The computer is turned on or returned from Standby mode when a call terminates on the
modem.
Point
- For PME LAN cards (PCIs), use 'Wake up on PCI PME.'
- When a modem connected to a serial port is switched on and off while [Enabled] is specified,
some types of modem may affect the PC, such as the PC being switched on or switched from
the standby mode.
- The setting of this item is not effective on Windows 95/98/2000.
– Wake up on PCI PME
This item sets whether to turn on the power or to return it from Standby mode when a PCI
extension card issues a PME signal.
- Disabled (Initial value)
The computer is not turned on or returned from Standby mode when a PME signal is
issued.
- Enabled
The computer is turned on or returned from Standby mode when a PME signal is issued.
– Wake up on Time
This item sets whether to turn on the computer or to return from Standby mode at the time
specified in 'Wake up Date' and 'Wake up Time.'
- Disabled (Initial value)
The computer is not turned on or returned from Standby mode at a specified time.
- Enabled
The computer is turned on or returned from Standby mode at a specified time.
Wake up Time
This item appears when 'Wake up on Time' is set. Set the computer wake-up time.
- 00:00:00 to 23:59:59 (Initial value: 00:00:00)
4
73