Fujitsu DESKPOWER 5000 Series User Manual page 54

8
Connect the power cord.
Connect the unused power cord to the
connector of the installed internal option.
9
Install the blank panel (for an option that
does not require a medium be mounted/
dismounted)
Install the blank panel with the screw that
were removed in step 4.
10
Attach the front panel.
Install or remove the blank panel as required.
Point
To install a 3.5-inch floppy disk drive or magneto-optic disk drive, install the accessory
expansion bay panel to the front panel by screws.
11
Attach the upper cover.
12
Use BIOS setup to configure the internal option.
To configure the IDE-standard installed internal option, use the main menu of BIOS setup
( see Section 2, "Main Menu," in Chapter 4, "BIOS Setup").
44
5-inch blank panel
Rear of
the panel
Hook
Bend the
hook inward.