Indications For Use; Fetal Monitoring; Maternal Monitoring; Blood Pressure - GE Corometrics 126 Service Manual

Indications for Use

Fetal Monitoring

Maternal Monitoring

Blood Pressure

Pulse Oximetry

Heart/Pulse Rate

NOTE: A Model 128 provides
maternal pulse rate data derived from
the NBP and MSpO sections of the
2
monitor. Only a Model 129 provides
both maternal heart rate and maternal
pulse rate data; the heart rate data is
derived from the MECG section of the
monitor while the pulse rate data is
derived from the NBP and MSpO
sections of the monitor.
2-2
Introduction: Indications for Use
A Corometrics 120 Series Monitor can be used for routine non-invasive and
invasive fetal monitoring throughout labor and delivery (i.e. fetal heart rate and
uterine activity monitoring) Fetal movement detection and fetal heart rate alarm
options (user selectable high/low and poor signal quality alarms) are available.
A Corometrics Model 128 or 129 Maternal/Fetal Monitor is intended for monitoring
maternal vital signs to help assess maternal well-being. The vital signs which can be
measured with either of these monitors are summarized below.
IMPORTANT– Maternal vital signs provided by the monitor
should only be used as an adjunct to patient assessment and must
be used in conjunction with clinical signs and symptoms.
This parameter is intended for use in the non-invasive monitoring of maternal blood
pressure (NBP). This monitor is not intended for use in neonatal or pediatric blood
pressure monitoring.
This parameter is intended for use in the non-invasive monitoring of the functional
oxygen saturation of maternal arterial blood (MSpO
This parameter is intended for use in the non-invasive monitoring of the maternal
heart/pulse rate (MHR/P).
2
120 Series Maternal/Fetal Monitor
2015590-001
).
2
Revision B