Preparing The Remote Control - Pyle Mobile Video System PLD41MUT Owner's Manual

REMOTE CONTROL

Preparing the Remote Control

Inserting the Batteries
1.First push to inside as the direction indicated by the arrow (See
Remove the battery holder as the direction indicated by the arrow (See
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3
3.Insert the battery holder. Push in the holder to the original position(See
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
10
1
)And then
).
2
4
).