Preparing The Remote Control - Pyle PLD71MU Owner's Manual

Remote Control
Button
Ref #
These buttons are used for numeric entry in many different menus.
24
0-9
In addition, in Radio Mode (when RDS is engaged), 0 serves as
the TA button and 9 serves as the AF button.
This button is used with the other number buttons for use with
25
+10
two-digit number entries.
Six numbered preset buttons store and recall stations for each band.
26 1-6

Preparing the Remote Control

Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See
Remove the battery holder as the direction indicated by the arrow (See
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See ).
3
3.Insert the battery holder. Push in the holder to the original position(See
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a foil . Before initial use please remove this foil so that the remote
control is ready for operation .
Function
30 degree in each the direction of the front of the IR mark.
-12-
1 )And then
2 ).
4
).