Table of Contents
Advertisement
BASIC OPERATION
1
13
11
9
10
1.REL BUTTON
Press the REL button to detach the removable front panel.
2.PWR On/Off BUTTON
Press this button to switch the device On, WELCOME appears in the display.
Press it again to switch the device Off, SEE YOU appears in the display.
3-4.VOL+/VOL- & SEL BUTTON
( )
Press SEL 4 button briefly to across the sound/picture mode selection menu
by repeatedly pressing the SEL button you can select the individual menu items
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .
Then rotate the VOL + / - to adjust the selected mode.
(The corresponding value will show on the display.)
When mode has not been adjusted for several seconds, display returns to normal
radio or CD display.
A.Volume:
Adjust volume level by using VOL + / - button.
Note: The unit is initially set to volume mode.
B.Bass:
Press SEL button one time. Adjust bass level by using VOL + / - button.
C.Treble:
Press SEL button two times. Adjust treble level by using VOL + / -button.
D.Balance:
Press SEL button three times. Adjust sound balance between left
and right speakers by using VOL + / VOL - button.
E.Fader:
Press SEL button four times. Adjust sound balance between front and
rear speakers by using VOL + / VOL - button.
(
NOTE
: the function of the Color, Bright, Contrast and Tint. Please see 16 page.)
. BND BUTTON
5
In RADIO mode, press the BAND button on the front panel or on the remote
controller to select your desired radio band and word which band is selected
will be displayed in the TFT . Press it to change the bands as below :
FM
MW
For 3 Bands (Europe)
3
17 16
VOL-
VOL+
18
Volume
Bass
Tint
Contrast
LW
20
Treble
Balance
Bright
FM
MW
For 2 Bands (Europe)
11
6
12
14
SEL
19
7
15
Fader
Color
FM
For 2 Bands (USA)
8
4
5
2
AM
Advertisement
Table of Contents
