Setting Outlet Power-On Sequence And Delay - Raritan PX3-1000 series User Manual

Chapter 6: Using the Web Interface
160
PX3-1000 series does NOT support the following features.
To configure global outlet settings or perform the load-shedding
command:
1. Click to show a list of commands.
2. Select the desired command. Note that only outlet-switching capable
models show the commands marked with * in the table.
Command
*Sequence Setup
*Load Shedding Setup
*Activate Load Shedding
-- OR--
*Deactivate Load Shedding
To power control multiple outlets:
You can switch any outlet regardless of its current power state. That is,
you can turn on any outlet that is already turned on, or turn off any outlet
that is already turned off.
1. Click to make checkboxes appear in front of outlets.
Tip: To perform the desired action on only one outlet, you can simply
click that outlet without making the checkboxes appear.
2. Select multiple outlets.

To select ALL outlets, select the topmost checkbox in the header
row.
3. Click or select the desired button or command.
Refer to
Setting Outlet Power-On Sequence
and Delay
(on page 162)
Setting Non-Critical Outlets
page 163)
Load Shedding Mode
(on
(on page 164)