4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the hinge > Removing the Right hinge
Removing the hinge
■ Removing the left hinge
CAUTION:
When install DADF to a host machine after exchange work, adjustment of eight items is
need.
1) Remove the DADF from the host machine.
2) Open the feeder cover.
3) Removing the Rear
Cover.("Removing the Rear Cover"(page
4) Remove the left hinge.
- Screw 6 pcs.
x6
4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the hinge > Removing the Right hinge
■ Removing the Right hinge
4-18).)
F-4-81
CAUTION:
When install DADF to a host machine after exchange work, adjustment of eight items is
need.
1) Remove the DADF from the host machine.
2) Reverse ADF.
3) Remove the Right hinge.
-Screw 2 pcs.
x2
4-35
F-4-82
4-35