Canon H1 Service Manual page 49

4
Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the CCD Unit
6) Loosen the screw, and then loosen the belt.
7) Remove the belt from the hook at the back of the CCD unit.
4 Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the CCD Unit
F-4-13
8) Remove the CCD unit.
• Cable retainer
• CCD flexible cable
F-4-14
CAUTION:
• Do not touch the LED on the CCD unit.
• Do not touch the board part so that there is influence on image.
x1
4-7
F-4-15
F-4-16
4-7