Canon H1 Service Manual page 104

22) Route the cables as shown in the figure.
• 1 Wire saddles
• 1 Edge saddle
Wire Saddle
x2
23) Attach the following parts to the operation panel.
• 2 Connectors
• 1 Reuse band
• 5 Wire saddles
• 2 Screws (Bundled in the Host Machine)
x2
x6
x2
Wire Saddle
6
Installation > Installation Procedure > Installation Procedure
Edge Saddle
F-6-32
Reuse Band
Wire Saddle
6 Installation > Installation Procedure > Installation Procedure
24) Attach the operation panel.
• 2 Screws (RS-tight, M3×8)
• 2 Claws
x2
x2
25) Attach the reader front cover.
• 2 Screws (RS-tight, M3×8)
26) Attach the reader rear cover.
• 4 Screws (RS-tight, M3×8)
F-6-33
removed at the step 19)
6-11
F-6-34
6-11