Removing The Reader Assembly - Canon H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the Reader Assembly

Removing the Reader Assembly

<Procedure>
1) Disconnect the ADF cable.
2) Remove the reader left cover.
3) Remove the reader right cover.
4) Remove the reader rear cover.
5) Remove the rear cover.
6) Remove the controller cover.
7) Remove the reader front cover.
8)Remove the operation panel.
9) Remove the operation panel fixing plate .
• 8 Screws
x8
4 Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the Reader Assembly
10) Disconnect the connector of the reader.
11) Connect the flexible cable.
F-4-23
x1
x2
4-12
F-4-24
F-4-25
4-12