If the RSSI (Radio Signal Strength Indicator) LED is blinking constantly then try moving the router to
another location. The router takes 1~2 minutes to initialize, attach to the network and obtain an IP
address.
Power supply
For normal operation connect the router to the external power adapter. In case of power failure or when
there is no available external power supply, the router can not work.
About (U)SIM card
Avoid handling the (U)SIM card unnecessarily. Hold the card by the edges to prevent static damage. Keep
the (U)SIM card away from electrical and magnetic appliances.
Notes on Service and Coverage
If you cannot get service, make sure that:
You are in an area which has sufficient network coverage.
•
You are using the correct (U)SIM card.
•
If necessary you need enter your PIN or PUK code.
•
If the RSSI (Radio Signal Strength Indicator) LED is blinking constantly then try moving the modem to
•
another location.
Please wait 1-2 minutes for the modem to initialize, attach to the network and obtain an IP address.
•
14 Confidential and Proprietary Information of ZTE CORPORATION
MF613 3G Wireless Router User Manual