Zte MF613 User Manual page 25

MF613 3G Wireless Router User Manual
WDS Mode: Lazy Mode, Bridge Mode and Repeater Mode are available. The default value is Disable.
•
Phy Mode: Physical layer transmission mode. CCK, OFDM, HTMIX and GREENFIELD are available.
•
EncrypType: The encryption type including NONE, WEP, TKIP or AES. If you select NONE, any data
•
will be transmitted without encryption and any station can access the router.
AP MAC Address: For WDS Mode of Bridge Mode and Repeater Mode, you have to fill in the other
•
AP MAC address.
The HT physical Mode parameters are shown in the following figure:
Operating Mode: Set the HT physical operating mode.
•
Channel Bandwidth: Set the HT physical channel bandwidth.
•
Guard Interval: Set the HT physical guard interval.
•
MCS: Set fix MCS rate for HT rate.
•
Reverse Direction Grant(RDG):Enable RDG or not.
•
Extension Channel: Set extension channel. The extension channel is also able to send and receive data.
•
Aggregation MSDU(A-MSDU) : Mark to enable Hyper Throughput TX Aggregate MAC Service Data
•
Unit, and clear by selecting Disable.
Auto Block ACK: Block ACK(Acknowledge Number) or not during data transferring.
•
Decline BA Request: Reject peer BA-Request or not.
•
Click Apply to confirm your configuration.
Advanced
Confidential and Proprietary Information of ZTE CORPORATION 25