Zte MF65+ Getting Started

LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
ZTE MF65+
translated or utilized in any form or by any means, elec-
Let's go tronic or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.

Getting Started With Your Device

The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specifications without prior notice.
Version No.: R1.0
Manual No.:079584506967
NOTE:
Do not use the device in an enclosed environment or where
heat dissipation is poor. Prolonged work in such space
may cause excessive heat and raise ambient temperature,
which may lead to automatic shutdown of the device for
ZTE CORPORATION
your safety. In the case of such event, cool the device in a
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
well-ventilated place before turning on for normal use.
Postcode: 518057
Getting to Know Your Device Status icons
When the device is powered on, the following icons may
Appearance
be displayed on the OLED screen. For a description of the
The following figure is for your reference only.
icons, refer to the following table.
Icon Description
Network signal strength.
Network type. 2G and 3G icons will ap-
2G/3G
pear on the OLED screen according to
the network being connected.
Connected to the network.
1. OLED screen
2. Power switch
3. WPS button The user is in roaming status.
4. Micro USB port
5. microSDHC card slot
One or more new messages are received.
6. SIM (or USIM) card slot
NOTE: Wi-Fi status and the number of connected
users.
The microSDHC™ logo is a trademark of SD-3C,
LLC. Battery power.
Connection Scenario
The device can access the Internet and allows multiple
clients to surf on the Internet at the same time. The follow-
ing figure is for your reference only.
A SIM or USIM card can be used to access the Internet.
3. (Optional) Insert an SD card.
Install a microSDHC card to the microSDHC slot. The fol-
lowing picture shows the correct installation direction.
Installing Your Device
1. Slide the back cover and remove it.
4. Install the battery.
2. Install the SIM card.
IMPORTANT:
Your device does not support the micro-SIM card and
nano-SIM card or any other nonstandard SIM cards. To
avoid damaging the device, do not use those cards or any
5. Close the back cover.
card holders.
Connecting Your Device
Using Wi-Fi
1. Power on your device.
2. Use the Wi-Fi application on a client to search for
available wireless networks.
NOTE:
You can find the default SSID on the label of your device.
4. Enter the password, and then click Connect.
NOTE:
Set the client to obtain an IP address automatically. For the
detailed procedure, refer to Configuring Your PC. The client
gets an IP address, for example, 192.168.0.101.
3. Select the SSID of your device, and then click
NOTE:
Connect.
You may need to enter the password for the Wi-Fi con-
nection. You can view the label on your device to get the
default password.
5. Wait until the client is connected to your device suc-
cessfully.
Using a USB Cable
1. Connect a client to your device through a USB cable.
2. Power on your device. The operating system detects
and identifies new hardware, and automatically fin-
ishes the installation.
NOTE:
If the system does not automatically launch installation,
you can run the installation program in the My Computer/
ZTEMODEM path.
3. Wait until the client is connected to your device suc-
cessfully.