Zte MF613 User Manual page 24

following figure:
Basic
Select Wi-Fi Setting > Basic, the wireless network parameters and WDS mode are shown in the
following figure:
Wi-Fi On/Off: Click this button to set the router Wi-Fi On or Off.
•
Network Mode: Including 11b/g Mixed Mode, 11b only,11g only and 11b/g/n Mixed Mode.
•
Network Name(SSID): Service Set Identifier. Enter a string less than 32 characters as the name for your
•
wireless local area network(WLAN).
Broadcast Network Name(SSID): Disable or Enable(Default) this function. The router broadcasts the
•
SSID, and other devices can detect and connect to it by selecting Enable. The router disables
broadcasting and hides the name of your network by selecting Disable.
AP Isolation: When enable this function, each of your wireless client will not be able to communicate
•
with each other.
BSSID: Show the MAC address of the Wi-Fi.
•
Frequency(Channel): The frequency band in which the WLAN operates. If some channels in your area
•
may have interference from other electronic devices, please choose the clearest channel to optimize the
performance and coverage of your wireless network. The default value is 2437MHz(Channel 6).
The Wireless Distribution System allows the router to communicate with other APs wirelessly. To make it
work, please make sure that the router and these APs are in the same channel with the same SSID.
24 Confidential and Proprietary Information of ZTE CORPORATION
MF613 3G Wireless Router User Manual