Connecting To The Internet; Connecting With External Power; Switching On Your Device; Power Supply - Zte MF29 User Manual

Connecting to the Internet

Connect the WAN/LAN interface to the Internet with an Ethernet
cable (RJ45).

Connecting with External Power

Connect the external power adaptor to a standard power outlet. In-
sert the plug into the power socket at the rear of the router.

Switching on Your Device

1. Turn the power switch on to get started. Make sure that the
phone is on hook before powering on.
Notes:
Do not put anything on the top of the router. Do not lay routers to
overlap each other when using.
2. Wait 1~2 minutes after turning the router on before you use the
service. The 3G & POWER indicator should be lit on.
Notes:
When the router is turned off, an incoming caller will hear the prompt
like "The number you have dialed is currently unavailable."
If the net mode indication LED is blinking constantly, try to move the
router to another location. The router takes 1~2 minutes to initialize,
attach to the network and obtain an IP address.

Power Supply

For normal operation, connect the router to the external power
adapter. In case of power failure or when there is no available exter-
nal power supply, the router will not work.
MF29T User Manual V1.1-0703.indd 12-13
12

Voice

Making a Call

You can make a call through VoIP. The VoIP number is provided by
your service operator. Please contact your service operator to get
detailed information.
To make a call:
1. Pick up the handset.
2. Key in the telephone number.
3. You can either press # key on the telephone to send the call, or
wait 4~8 seconds for the call to be connected automatically.
4. Call will be connected.
Note:
If there is no 3G indication, the RF signal is unavailable. Change the
location of the router and make sure nothing is blocking it.
Making a Trunk Call
If you are making a trunk call, add the area code as normal.
E.g. 03 9612 3456
Making an International Call
If you are making an international call, key in the international ac-
cess code followed by the country code, area code and number.
E.g. 00 11 64 12 345678

Answering a Call

When the phone rings, pick up the handset to answer it. If the tele-
phone has hands-free function you also can answer the call by
pressing the Hands-free button. Press the Hands-free button again
to end the call.
13
2012-7-3 16:46:29