Page 2
ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Quick Guide Introduction ZTE MF60 is a 3G/2G mobile hotspot device, working in GSM/GPRS/EDGE/WCDMA/HSPA/HSPA+ network. The client devices could connect to it via USB or Wi-Fi interface. The device supports data and SMS services, enabling you to communicate anytime and anywhere.
When the device is powered on, the following icons will appear on the LED screen, with the corresponding indicates listed in the table below: Icon Indication Network signal strength. Network type. 2G or 3G icon will appear on the LED screen according to the network 2 Confidential and Proprietary Information of ZTE CORPORATION...
2. Insert the SIM card into the SIM card holder. 3. Insert the battery as shown with the contacts located against the metal springs, and press the battery down into the case. Confidential and Proprietary Information of ZTE CORPORATION 3...
2. The plug only fits one way. Do not use excessive force to insert the plug. 3. Make sure the plug is the right way round and lined up correctly and insert it gently. 4 Confidential and Proprietary Information of ZTE CORPORATION...
If you want to connect to the Internet by using Wi-Fi mode, make sure that the client supports the Wi-Fi function. The following picture is the application example. All of the client devices can surf on the Internet at the same time. Confidential and Proprietary Information of ZTE CORPORATION 5...
After the installation, the system will create a shortcut icon on your desktop and a ZTE USB Drivers for MF60 program group in the Start→Programs menu. The connection between your device and the client will be established successfully a moment later.
It is recommended that you use IE (6.0 or later), Firefox (2.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (5.0 or later). 3.The login page appears as follows. Confidential and Proprietary Information of ZTE CORPORATION 7...
The SIM card will be locked if you enter wrong PIN code consecutively for three times. Settings > Advanced > PIN Manage to do the If you want to modify the PIN Status, please select actions. 8 Confidential and Proprietary Information of ZTE CORPORATION...
View the current station list, change the basic wireless network settings, choose security mode and WPA type, and perform the WPS configuration. Select Settings > Firewall Set the Mac/IP/Port Filtering, Port Forwarding or the System Security configuration. Confidential and Proprietary Information of ZTE CORPORATION 9...
If your client device supports WPS, you need not to input the password manually after WPS has been available. Please do the following: 1. Start up your device. 2. Launch the client device connected to your device. 10 Confidential and Proprietary Information of ZTE CORPORATION...
Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged. • No dismantling by non-professionals and only qualified technicians can undertake repair work. • Confidential and Proprietary Information of ZTE CORPORATION 11...
FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power 12 Confidential and Proprietary Information of ZTE CORPORATION...
Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.