Zte MF613 User Manual page 27

MF613 3G Wireless Router User Manual
shown in the following figure:
Security Mode:
•
WPA-PSK/WPA2-PSK.
Encrypt Type: Use WEP Encryption or not.
•
The Wireless MAC Filtering is used to control the wireless network access.
Add MAC Filtering Rule: Choose the type of MAC filtering, Wireless Disable, Wireless Allow or
•
Wireless Reject.
MAC Address: Add the MAC addresses to the rule list.
•
Click Apply to confirm.
Notes:
For Add MAC Filtering Rule of Wireless Allow: The devices with the MAC address added in the
•
list can communicate with the router. And others can not.
For Add MAC Filtering Rule of Wireless Reject: The devices with the MAC address added in the
•
list can not communicate with the router. And others can.
The security modes are described below:
Open: You can authenticate successfully with a SSID, whether it is valid or empty.
•
SHARED: The WLAN clients who have the same WEP key with wireless gateway can pass the
•
authentication and access the wireless network.
WEPAUTO: Select WEP security automatically.
•
WPA-PSK: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase of at
•
least 8 characters.
WPA2-PSK:It is the securer version of WPA with implementation of the 802.11i standard.
•
WPA-PSK/WPA2-PSK:Apply both the WPS-PSK and WPA2-PSK scheme.
•
If the Authentication type is Shared or WEPAUTO, or you select Open and set the Encrypt Type as
WEP, the WEP parameters are shown in the following figure.
Including OPEN,
Confidential and Proprietary Information of ZTE CORPORATION 27
SHARED, WEPAUTO, WPA-PSK, WPA2-PSK or