Playing With Loops In Hotcue Mode; Engaging And Disengaging A Loop - Native Instruments traktor kontrol s5 Manual

3.2

Playing with Loops in HOTCUE Mode

Now that we've covered all basic mixing techniques and how to use the Touch Strip, we will
focus on S5 s looping facilities in HOTCUE mode.
Prerequisites
We assume here that the S5 is in the following state:
▪ The track Techno 1 is loaded on Deck A and stopped.
▪ The Crossfader is all the way to the left.
▪ The channel fader A is raised to the top.
▪ The
MAIN knob has an adequate level.
3.2.1

Engaging and Disengaging a Loop

Let s add a loop to the track on Deck A.
To engage a loop on a Deck:
1. Press the Deck's PLAY
2. Press the Deck's HOTCUE
3. Press the Deck's LOOP
the loop is activated.
button to start playback.
button to enable HOTCUE mode.
encoder. The LED next to the
Using Your S5—Getting Advanced
Playing with Loops in HOTCUE Mode
LOOP encoder flashes to indicate
TRAKTOR KONTROL S5 - Manual - 79