Setting Up An Fx Unit To Group Fx Mode - Native Instruments traktor kontrol s5 Manual

► On the mixer press the left FX Assign button of a channel to assign FX Unit 1 to a Deck.
The FX Assign button lights up brightly.
►
Press it again to unassign the Deck from FX Unit 1.
To assign FX Unit 2 to a Deck:
► On the mixer press the left FX Assign button of a channel to assign FX Unit 2 to a Deck.
Press it again to unassign the Deck from FX Unit 2.
FX Unit 1 and 2 can be assigned to all four Decks simultaneously:
3.7.2

Setting up an FX Unit to Group FX Mode

When an FX Unit is set to Group FX mode, it allows up to three different audio effects to be
used simultaneously within an FX Unit. The following section explains how to set up your own
Group FX, and how to control its three effects via the FX knobs and FX buttons.
Prerequisites
▪ The track "Techno 1" is loaded on Deck A. The track is playing and audible.
Setting up an FX Unit to Group FX Mode
To load a Group FX into FX Unit 1:
Using Your S5—Getting Advanced
TRAKTOR KONTROL S5 - Manual - 110
Adding FX