Global Section; Main Knob - Native Instruments traktor kontrol s5 Manual

Hardware Reference
The Mixer

4.4.2.6 GLOBAL Section

Snap and Quantize modes can be enabled/disabled directly from the S5 by pressing the corre-
sponding buttons S and Q buttons in the GLOBAL section.
GLOBAL Section
These S5 controls only affect TRAKTOR's Decks.
Snap Button
The Snap button, labeled S, allows you to activate/deactivate Snap mode. With Snap mode ac-
tive, every Cue Point or Loop Point you set will snap to the closest beat.
Quantize Button
The Quantize Button, labeled Q, allows you to activate/deactivate Quantize mode. With Quan-
tize active, all skip actions within a track (Hotcues, Beatjumps, etc.) are beat-accurate.
If you trigger a jump before a beat, TRAKTOR delays the action so that the effect occurs on the
beat. This way, your track always stays in sync, allowing a perfect real-time remixing.

4.4.2.7 MAIN Knob

The MAIN knob controls the overall output level of your mix going to S5's MAIN OUTs.
MAIN Knob and MAIN Level meters
The LED meters to the left and right show the output level. If the MAIN knob is turned left
(towards its minimum value) the associated main level meters will go down, accordingly.
TRAKTOR KONTROL S5 - Manual - 181