Native Instruments traktor kontrol s5 Manual page 128

2. Press the dim Pad to reset the Stem Part s volume and
The VOLUME and FILTER
The simultaneous reset of
Applying FX SEND to Stem Parts
You can also apply FX SEND to any of the Stem Parts.
In order to activate the FX Unit s FX on Stem Parts:
1. On Channel A press the right FX Assign button to assign the Stem Deck to FX Unit 2.
2. On the left Deck hold the
per row of Pads now dim red.
3. Press the red Pads to activate the FX SEND on the Stem Parts.
are reset and the Pad now lit brightly.
VOLUME and FILTER settings can be done to all Stem Parts at once.
SHIFT button to access the Pads secondary functions. The up-
Using Your S5—Getting Advanced
Mixing Stem Files using Stem Decks
FILTER settings.
TRAKTOR KONTROL S5 - Manual - 128