Diagnostics Panel - Native Instruments traktor kontrol s5 Manual

Device Monitor Section
This section displays information about the audio interface's processing status and your sys-
tem's output latency.
Processing State: The processing state monitor provides feedback on the current status of the
device. There are three possible status messages:
▪ Idle: controller is connected, but no audio data is being streamed.
▪ Streaming: driver is working and processing audio data.
▪ Panic: driver stopped streaming. Too many USB I/O errors occurred in the interface com-
munication.
Output Latency : displays your system s output latency in milliseconds.
Please note, when running external sources like turntables or microphones through
TRAKTOR, an additional input latency will occur.
7.2.3

Diagnostics Panel

The Diagnostics page allows you to monitor the controller s performance and to detect errors.
This information can be helpful to see the results of Process Buffer value adjustments and may
help troubleshooting in case you need to contact our technical support.
The S5 Audio Interface and Control Panel
Settings on Windows: The Control Panel
TRAKTOR KONTROL S5 - Manual - 199