Calibrate; Leds - Native Instruments traktor kontrol s5 Manual

▪
Bend Invert: by default deactivated; swiping to the left slows playback down momentarily.
If activated, swiping to the left nudges playback forward.
▪ Scratch Invert: by default activated; swiping to the left advances playback position in the
track. If deactivated, swiping to the left goes back in a track.
▪ Shift + Touch to Scratch: by default deactivated, holding the
the Touch Strip performs an absolute seek. If activated, holding the
ing within the Touch Strip performs a scratch effect or backspin.
6.4

Calibrate

Calibration ensures that each control allows adjustments over their full range and with maxi-
mum precision. These settings are precisely calibrated during production, although they might
need to be recalibrated over the lifetime of your S5 unit. Recalibration is necessary when a
control ceases to allow you to set actual minimum and maximum values.
Calibration is done in groups of control elements, just click the corresponding
ton:
▪
FX Knobs: for recalibrating the FX knobs on both FX Units 1 and 2.
▪ Short Faders: for recalibrating the Slot Volume Faders.
▪
FX Knobs: for recalibrating the FX knobs on both FX Units 1 and 2.
▪
Mixer Knobs: for recalibrating EQ (HI, MID, LOW) and
▪
Mixer Faders: for recalibrating the channel faders.
▪ Crossfader: for recalibrating the Crossfader.
6.5

LEDs

The pad and button backlights on the S5 offer two distinct brightness levels to indicate On and
Off states. Depending on your light conditions during a performance, it can be necessary to ad-
just these.
Preferences Pane in TRAKTOR
SHIFT button +swiping within
SHIFT button +swip-
Recalibrate
FILTER knobs.
TRAKTOR KONTROL S5 - Manual - 194
Calibrate
but-