Gain Knob - Native Instruments traktor kontrol s5 Manual

From top to bottom, a mixer channel consists of the following controls:
(1) GAIN knob: The GAIN
adjust the relative levels between Decks. For more information, refer to section
Knob.
(2) FX Assign buttons: The FX Assign buttons assign the channel to the FX Units. For more in-
formation, refer to section
(3) Input level meter: Each channel has a dedicated Input level meter that displays the signal
level before the channel fader. For more information, refer to section
(4) EQ (HI, MID, LOW) knobs: These knobs control the frequency balance. For more informa-
tion, refer to section 4.4.1.3, EQ
(5) FILTER button and FILTER knob: These controls control a Filter
vated via the FILTER button. For more information, refer to section
and FILTER Knob.
(6) CUE button: The CUE button allows you to audition the channel s signal on your head-
phones. For more information, refer to section
(7) Channel fader: The Channel fader lets you smoothly fade a channel into to the mix. For
more information, refer to section

4.4.1.1 GAIN Knob

The GAIN knob controls the level a channel receives from the corresponding Deck or audio in-
put in order to avoid differences in loudness when mixing.
GAIN knob
knob controls the level directly after the channel input so you can
4.4.1.2, FX Assign Buttons.
Knobs.
4.4.1.7, CUE
4.4.1.4, Channel
4.4.1.5, Channel
(HPF or LPF) effect once acti-
4.4.1.6, FILTER Button
Button.
Fader.
TRAKTOR KONTROL S5 - Manual - 170
Hardware Reference
The Mixer
4.4.1.1, GAIN
Meter.