Table of Contents
Advertisement
Programming Parameters
Overview
86
Note:
For information about programming, refer to
This appendix provides information about all programmable settings for
the PT2000 and TopGun.
lists programming ID numbers for predefined defaults
Table A-1:
(refer to
page 87
lists save-and-exit settings (refer to
Table A-2:
provides the following information (refer to
Table A-3:
Note:
For explanations of some general programming parameters,
refer to
page 66
to
.
page 68
Code Parameter :
ID # :
is the "portable" name for programming options. For example, to
set a Code 39 minimum label length, enter
portable. Programming ID numbers given in this appendix can be used
with all programming methods.
tells what kind of setting to use for each code parameter:
Type :
is a toggle. 1 turns the parameter on, and 0 turns it off.
On/Off :
Value :
requires a two-character entry (e.g.,
good read, or
05
String :
uses one or more ASCII characters, followed by
the end of the string.
Immediate :
Acceptable Input :
use for each code parameter.
).
. For explanations of serial parameters, refer
is the "human" name for programming options.
for a length of five).
takes effect as soon as the ID number is entered.
gives the settings or range of settings that you can
Chapter 4
).
page 87
page 88
when programming the
01
for two beeps after each
02
//
to indicate
PT2000™ & TopGun™
.
):
Hide quick links:
Advertisement
Table of Contents
