Pdprog - PSC PT2000 User Manual

Programming the PT2000 and TopGun

PDPROG

62
PDPROG is the utility used to program a PSC portable through DOS.
Using PDPROG involves entering commands on the DOS command
line. The command line syntax is as follows:
pdprog filename[.hex] [-¦/][port]
where
= the name of the file for the application to install in
filename
the portable (The file has a .hex extension. Do not include the
extension in the command line.)
=
port 1¦2¦3¦4
The port setting is optional and can be entered either before or after the
file name. If used, precede it with a hyphen (
For example, use the command
description program to a portable over the COM1 serial port.
to specify the serial port (default=COM2)
-
pdprog descript -1
) or a slash ( ).
/
to transfer the
PT2000™ & TopGun™