Downloading A File; Changing Settings - PSC PT2000 User Manual

Transferring Data With PSC Utilities

Downloading a File

Changing Settings

76
To send a file from the PC to the PT2000 or TopGun:
1. Prepare the portable to receive a file.
Note: Refer to the information about the DESCRIPT application
on Page 35.
Then select
2.
File > Send
3. Specify the name and location of the file in the
dialog box. (Except for the title bar, the
box is identical to the
.)
Figure 5-4
When the file has been successfully transferred, a message appears
4.
in the
PTFER
By default, uses the PC's COM2 port for communicating with
PTFER
the portable.
If the COM2 port is already in use by a modem, mouse, or other device,
specify a different port or alter the communications settings for the port.
Note: When not sure what settings to use, leave them at the
defaults. To restore factory defaults, scan the bar codes in
Predefined Defaults on page 128
To use a different port or to alter port settings:
1. Select
Options > Settings
Communications Settings
from the
File to Receive
window.
from the
dialog box (
menu.
PTFER
File to Transmit
File to Transmit
dialog box, shown in
menu to receive the
PTFER
).
Figure 5-4
PT2000™ & TopGun™
dialog