Setting Command Line Options - PSC PT2000 User Manual

Transferring Data With PSC Utilities

Setting Command Line Options

78
Note: In Windows 3.x, the command is in the
input box in the application's
window in the Program Manager.
In Windows 95, create a shortcut to the application. (The
Desktop is a good place to put the shortcut.) Find the
command in the
shortcut's
Properties
Change settings for the
the program by entering options for the command that starts it. Type
the options using the following syntax:
ptfer filename [-¦/][Pn][Bn][Dn][action]
where
= the name of the file to transfer (include the extension)
filename
= the number of the COM port to be used (
Pn
default setting is
= the baud rate to use (the default setting is
Bn
= the timeout period, in seconds (the default is 30 seconds on
Dn
receive and 1 second on transmit)
= to receive data and append it to the existing file
action A
to connect automatically when transmitting or receiving
C
to echo the display to the screen
E
to display on screen help
H
to maximize the
M
to minimize the
N
0n n n
to receive data from the portable and replace the existing
R
file contents
to display the line count in the title bar
S
to transfer data to the portable (the default)
T
to exit automatically after data is transmitted or received
X
box on the
Target input
window.
Portable File Transfer
)
P2
window
PTFER
window
PTFER
to set the size and position of the PTFER window
Command Line
Program Item Properties
Properties
program before starting
, ,
1 2
B9600
PT2000™ & TopGun™
tab of the
, or ; the
3 4
)