About The Power Adapter - PSC PT2000 User Manual

The PT Dock
Figure D-4: Sample PSC Keyboard wedge

About the Power Adapter

112
To computer
To use the PT Dock with a serial cable, use a 9-volt power adapter to
recharge the NiCd batteries in the PT2000 or TopGun. Power adapters
are available from a PSC dealer. (When using the keyboard wedge
configuration, power is supplied by the workstation.)
Note: Use only a 9-volt power adapter supplied by PSC. Using
another adapter can damage the unit.
Attach the small, round plug of the power adapter to the power input
jack on the back of the PT Dock (refer to
into a 110-volt outlet or power strip. The green light-emitting diode
(LED) labeled
POWER
up.
To PT Dock
Figure D-3
on the front panel of the PT Dock should light
To keyboard
). Plug the other end
PT2000™ & TopGun™