PSC PT2000 User Manual page 40

Using the PT2000 and TopGun with PALPRO
Figure 3-25: The Item ID Display
30
3. The application menu appears next on the display screen.
Continue with the instructions for
4.
Using Two Prompts
in step .
1
Using One Prompt
Select from the application menu.
1.
<F2>
A prompt appears on the screen.
Scan the bar code for an inventory item, or use the keypad to
2.
enter the item's ID number or description.
Using a scanner, the code is entered automatically; with a
keypad, press the
3. The item ID number appears on the third line of the screen. The
portable is ready to accept another item ID.
Repeat step
4. 1
5. Press the
<F2>
The portable stores the collected data in a single ASCII text file. When
uploading the file to the PC, the data appears as a list. Each line in the
list contains the ID for a single item. The example in
of a data file uploaded from a portable that used
prompt to collect data.
on , depending on the selection made
page 31
key.
<ENTER>
ITEM ID
¤
40-000-00
F3=REV F4=EXIT
until all IDs for all items are collected.
key to return to the application menu.
, below, or
Using One Prompt
Figure 3-26
with one
INVPRO
PT2000™ & TopGun™
is part