Using Palpro - PSC PT2000 User Manual

Figure 3-8: The PT2000 Wedge Menu

Using PALPRO

Selecting a
PALPRO
Application
Figure 3-9: The PALPRO Options Menu
User's Guide
Use a bar code scanner (the TopGun module or another device
3.
attached to the PT2000), a magnetic stripe reader, or the keypad
to enter data.
When scanning a bar code or running a magnetic stripe card
through the reader, the data is entered at the cursor position
in the application.
When using the keypad to enter the data, the data is
displayed in the second line of the PT2000 display screen.
Press the
4. When finished collecting data, press the
(
<Alpha>+<F1>
combines three Portable Applications Library applications into
PALPRO
a single, convenient program (refer to
on the PSC portable, it is possible to switch from one application to
another without having to install each application.
Complete the following steps to select a
With the
1.
PALPRO Options
> key, to send the data to the PC.
<ENTER
) to exit.
* PT2000 WEDGE *
¤
F5=EXIT
page 8
menu displayed, press the
PALPRO OPTIONS
F2=SELECT PROG
F3=WEDGE
F4=PASSWORD
Collecting Data
key
<F5>
). With
PALPRO
application:
PALPRO
¤
installed
key.
<F2>
23