Programming the PT2000 and TopGun
Figure 4-1: The PSC Portable Programmer (PERCPROG) Main Window
Figure 4-2: The Communications Settings window
60
From the menu, select
3.
window will open (refer to
Settings
4.
Select the desired serial port. Then select
Note:
After changing the serial port setting, PERCPROG will keep
the new setting until it is changed again. Use the icons in the
PSC PAL program group (Windows 3.1) or the Start Menu
(Windows 9x) to install an application.
From the PSC
5.
The
Program File
Options > Settings
Portable Programmer
window will open (refer to
. The
Communications
).
Figure 4-2
.
OK
menu, select
File > Open
).
Figure 4-3
PT2000™ & TopGun™
.