PSC PT2000 User Manual page 87

Figure 5-4: The Communications Settings dialog box
User's Guide
Note: When a connection has been made to the serial port, the
option is dimmed on the menu and cannot be
Settings
selected. Select
application, and then select
To use a different COM port, select it in the
2.
3. Use this dialog box to switch baud rate, the number of stop bits,
and the type of parity. (Use the settings which match the settings
used in the PT2000 or TopGun.)
When finished, click on the
4.
port, or select
menu to make the connection.
Using Portable File Transfer Program (PTFER)
Options > Connect
Options > Settings
Connect
and then use the
OK
again to disconnect the
again.
options group.
Port
button to connect to the
command in the
Connect
77