Assembly Procedure - XDP Recreation 86150 Assembly, Care & Maintenance Manual

STEP 1 – Assemble the top bar frame of the swing set
 Connect A1, A2 and A3 secure with B1, B5, B4 and B3 as shown below.
Note: All round holes should be facing up and concave holes facing down.
A1
STEP 2 – Prepare the sleeve of the support legs
Connect A8 to A4
Repeat the above step for another five A4 legs like this
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdp-recreation.com
B3
B4
B5
B1
A4
A8
DO NOT RETURN TO RETAILER YOU PURCHASED AT.
B3
B4
B5
A2
B1
A3
14