Care And Maintenance Checklist; Disposal Instructions - XDP Recreation 86150 Assembly, Care & Maintenance Manual

Table of Contents

Advertisement

AT THE BEGINNING OF EACH PLAY SEASON:
Tighten all hardware.
Lubricate all metallic moving parts.
Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose,
cracked, or missing.
Check all moving parts including swing seats and chains for wear, rust or other deterioration.
Replace as needed.
Check metal parts for rust. If found, sand and repaint using a non-lead paint meeting the
requirements of 16 CFR 1303.
Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold
season.
Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as needed.
TWICE A MONTH DURING PLAY SEASON:
 Tighten all hardware.
 Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose,
cracked or missing.
 Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as needed.
ONCE A MONTH DURING PLAY SEASON:
 Lubricate all metallic moving parts per manufacturer's instructions.
 Check all moving parts including swing seats and chains for wear, rust or other deterioration.
Replace as needed.
 Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as needed.
AT THE END OF EACH PLAY SEASON:
 At the end of each play season or when the temperature drops below 32 degrees F (0 degrees C).
 Remove plastic swing seats and other items as specified by the manufacturer and take indoors or
do not use.
 Rake and check depth of loose fill protective surfacing materials to prevent compaction and to
maintain appropriate depth. Replace as needed.
As a general rule, maintenance should be performed at any time it is deemed necessary.

DISPOSAL INSTRUCTIONS

 Please use care when disassembling the equipment, when it is no longer in operational condition.
Wear heavy duty working gloves to avoid injuries.
 Fully disassemble the entire swing and slide sets before disposal. Do not leave partially
disassembled parts in areas accessible by children.
 Should you wish to recycle the steel tubing, please take the frame to your local recycling center.
 All plastic parts can be recycled, take it to your local recycling center. Do not let children play with
any disassembled parts meant for disposal, such as chains, slide, tubing, bolts, nuts, screws, etc.
 All rusted parts, bolts must be properly disposed of in trash bin. Do not reuse.
Owners shall be responsible for maintaining the legibility of the warning labels.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdp-recreation.com

CARE AND MAINTENANCE CHECKLIST

DO NOT RETURN TO RETAILER YOU PURCHASED AT.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camo commander86155Freedom swing

Table of Contents