General Features
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep
and/or flash its green LED) upon successfully reading a bar code.
Choices are:
•
Good Read = Indicate after decode
•
Good Read = Indicate after transmit
•
Good Read = Indicate after CTS goes inactive, then active
This option, which uses CTS, is only valid for RS-232
interfaces.
NOTE
START
INDICATE
After decode
After transmit
After CTS goes
inactive, then
active
END
2-6
BARCODE
®
PowerScan
7000 Linear Imager