Good Read: When To Indicate - PSC Magellan 1000i Product Reference Manual

Good Read: When to Indicate

This feature specifies when the scanner will provide indication (beep and/or flash its green LED)
upon successfully reading a bar code. Choices are:
•
•
•
NOTE
After Decode
DEFAULT
After CTS goes inactive, then active
Product Reference Guide
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then active
This option (Indicate after CTS goes inactive, then
active), which uses CTS, is only valid for RS-232 inter-
faces.
PROGRAMMING BARCODES
LED and Beeper Indicators
START / END
After Transmit
2-7