Ack Nak Options - PSC LINEAR IMAGER 7000 Product Reference Manual

Interface Related Features

ACK NAK Options

This enables/disables the ability of the scanner to support the RS-232
ACK/NAK protocol. When configured, the scanner and/or host sends
an "ACK" when it receives data properly, and sends "NAK" when the
data is in error. Selections for this option are:
• Disable
• Enable for label transmission — the scanner expects an ACK/NAK
response from the host when a label is sent
• Enable for host-command acknowledge — the scanner will
respond with ACK/NAK when the host sends a command
• Enable for label transmission and host-command acknowledge
START
STATE
Enable Beep
on ASCII BEL
Disable Beep
on ASCII BEL
Disable Beep
on Not On File
Enable Beep
on Not On File
3-22
BARCODE
®
PowerScan 7000 Linear Imager