Good Read: When To Indicate - PSC QuickScan QS6500 Reference Manual

Good Read: When to Indicate

This feature specifies when the imager will provide indication (beep and/
or flash its green LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS goes inactive, then active
This option, which uses CTS, is only valid for RS-232
interfaces.
NOTE
START
INDICATE
After decode
After transmit
After CTS goes
inactive, then
active
END
Product Reference Guide
LED and Beeper Indicators
BARCODE
3-7