Host Commands; Accepting Rs-232 Commands - PSC LINEAR IMAGER 7000 Product Reference Manual

Host Commands

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:
COMMAND
Enable Scanner
Disable
Scanner
Reset Scanner
Not On File
Indication
Beep Good
Read Tone
Force Good
Read Tone
Bel
Identification
request
Health request
Status request
a. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the
steps indicated for the command. Host commands for other interfaces is
also available. Contact Tech Support for more details.
Product Reference Guide
ASCII HEX
E 0x45
D 0x44
R 0x52
F 0x46
B 0x42
0x01
0x07
i 0x69
h 0x68
s 0x73
Appendix F
COMMENT
Long series of beeps
Beeps if Good Read Beep is enabled
Beeps regardless of beep setting
Force Good Read Tone
Returns long response
Returns long response
Returns long response
a
a
a
F-1