Calibrating With Colorwise Pro Tools - Canon ColorPASS-Z5000 Color Manual

3
3-28 Color Calibration

Calibrating with ColorWise Pro Tools

Using the densitometer or AutoCal2, you can quickly measure color patches and
download these measurements to the ColorPASS using ColorWise Pro Tools
Calibrator.
Multiple users can be connected to one server with ColorWise Pro Tools, but
N :
OTE
only one user at a time can use Calibrator. An error message appears if you try to
calibrate when another user is already using ColorWise Pro Tools to calibrate.
ColorWise Pro Tools for Windows and Mac OS computers are fundamentally the
same; differences are noted in this chapter. The windows and dialog boxes you see
illustrated are the Windows version.
Changing the calibration has the potential to affect all jobs for all users, so you
N :
OTE
may want to limit the number of people authorized to perform calibration. An
Administrator password can be set from the ColorPASS Control Panel to control
access to calibration.
T
O CALIBRATE THE COPIER USING
1. Launch ColorWise Pro Tools and connect to the ColorPASS.
For instructions on configuring the connection to the ColorPASS, see Getting Started.
If the connection to the ColorPASS from Command WorkStation that also
N :
OTE
allows for access to ColorWise Pro Tools is not established, you can directly launch
ColorWise Pro Tools independently of Command WorkStation.
C :
ALIBRATOR