Select A Short Workflow - Canon ColorPASS-Z5000 Color Manual

2
2-5 Simple workflows
Select a short workflow
Every time colors are converted, performance and color accuracy are affected.
Therefore, a workflow with fewer steps minimizes the risk of error.
Workflow 1 using ColorWise calibration—minimal workflow
A minimal color workflow requires that you calibrate the copier. Select from printed
colors as described above, and set the CMYK Simulation option to None, since
simulation is not needed when colors are already defined using CMYK values
optimized for your calibrated copier.
CMYK Simulation set to None is also useful when you want to prepare an
N :
OTE
output profile of your calibrated copier or when you use less efficient color
management from the desktop (such as ColorSync or ICM).
In this workflow, colors are modified only at the calibration stage. This is indicated by
the black box in the diagram below.
Workflow 1—Colors you define in an application Colors in output from the copier
ColorWise ColorWise
Application File format Printer driver
CMS calibration
CMS
While this workflow lends some control over the color quality produced by the copier,
you should consider additional ColorWise color management, as described in the next
section.