Color Editor; Editing Profiles - Canon ColorPASS-Z5000 Color Manual

4
4-12 ColorWise Pro Tools

Color Editor

Color Editor is used to customize simulation and output profiles and can be accessed
either directly by clicking its icon in the ColorWise Pro Tools main window, or
indirectly through the Profile Manager.
Editing Profiles
Color Editor allows you to create custom profiles by editing existing simulation or
output profiles and saving the changes as a new profile. With Color Editor, you can
fine-tune a profile on your ColorPASS to meet your exact specifications.
You cannot edit source profiles; only simulation and output profiles can be
N :
OTE
customized.
Color Editor has two Edit Modes for editing output profiles.
• —Use Custom to edit output profiles and save customized versions of them.
Custom
• —Use % Density to view the calibration target, which is one component
% Density
of the output profile. You cannot make changes to the calibration target in this
window, but you can import a new target (see page 3-2).
Color Editor also has three Edit Modes for editing simulations.
• —Use Master mode to create a custom master simulation that affects all print
Master
jobs to which it is applied, unless a linked simulation exists for the selected
combination of simulation profile, simulation method, and output profile.
• or
Quick Full
simulations affect the print job only if the corresponding simulation profile,
simulation method, and output profile are selected. If you choose an output profile
and simulation method for which you have created a custom linked simulation, that
simulation is applied automatically to the job. If you choose a simulation method or
output profile for which there is no custom linked simulation, then the master
simulation is automatically applied.
—Use Quick or Full mode to create custom linked simulations. Linked