Canon ColorPASS-Z5000 Color Manual page 77

3
3-19 Calibrating with ColorWise Pro Tools and DTP41
9. Under Get Measurements, click Measure.
10. The selected Page Type and Paper Size options appear. Click Measure.
11. If necessary, select the appropriate COM port for the DTP41 from the Available Ports
Instructions field
12. Feed the measurement page into the DTP41, starting with the cyan strip.
pop-up menu.
The Instructions field displays instructions for selecting the port.
Align the page in the measurement page slot of the DTP41 so the appropriate color
column is centered below the alignment mark (see the diagram on page 3-6). Insert the
page about 3 inches, past the front idler rollers until it rests against the rear drive
rollers.
Select port for DTP41