1. Attach Legs To The Cross Beam - De La Espada LIGHT EXTENDING TABLE BY MATTHEW HILTON Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS CONTINUED
LIGHT EXTENDING TABLE
NOTE 6: While you work, be sure all connections are flush with
no gaps.
NOTE 7: After assembly, ensure that the table is resting on a
level surface
INSTRUCTIONS

1. ATTACH LEGS TO THE CROSS BEAM

a) Insert metal dowels into the holes on the side of the leg
frames by screwing them in a clockwise direction until tight.
b) Match the number on each leg frame with the number marking
on the tabletop and crossbeam.
c) Attach one leg frame to the cross beam by inserting the
metal dowels on the leg into the universal connectors on the
crossbeam. Tighten with an Allen Key.
NOTE: The recessed holes for the M8 bolts on the cross beam
should face downwards.
Repeat the steps to connect the second leg frame.
detail
0
2
M
A
T
T
H
E
W
H
I
L
T
O
N