Powering Up; Using The I/ O Module - VeriFone MX 915 Installation Manual

22

Powering up

This sect ion describes how t o connect t he MX 900 Series t erminal t o a power
source using t he mult iport cable or I/ O Module.
Note:
Warning:
Note:

Using the I/ O Module

1. Make all ot her connect ions bef ore connect ing t he power pack.
2. Insert t he plug f rom t he power pack int o t he +12V recept acle on t he I/ O
3. Plug t he power pack int o an indoor elect rical power out let .
If connect ed t o an ECR, t he MX 900 Series t erminal can receive power
f rom t he ECR.
Do not plug t he power pack int o an out door out let or operat e t he
t erminal out doors.
The power out let should be on a dedicat ed circuit or on an
unint errupt ible power supply (UPS). If ot her devices are plugged int o t he
same circuit , t he MX 900 Series device can pot ent ially experience power
f luct uat ions t hat might cause it t o malf unct ion.
module.
MX 900 Series Installation Guide
March 1, 2012