Sturtevant Richmont Exacta 2 Quick Start Instructions

Digital torque wrench. 1100-series
Hide thumbs Also See for Exacta 2:

Advertisement

S/R 1100-Series Exacta
and RFE - Ethernet controllers to provide torque application integration that extends from your shop control system
all the way to the fastener. The details of programming the tool through each controller are found in the controller
manual.

Safety

◘ Always wear appropriate personal safety equipment when operating this tool.
◘ Never use this tool for any purpose other than that for which it is intended.
◘ Never use the tool beyond its' rated torque capacity.
Caution
When using this product with an S/R controller and radio communication is lost, the tool will retain the
most recently-downloaded specifi cations until radio communication is re-established or alternate means
are used to change the specifi cations.

Battery and Battery Charger Selection

The Exacta
2 digital torque wrench has very specifi c battery requirements that must be adhered to. Only batteries
®
meeting these requirements may be used.
• Use of any batteries other than those provided by S/R or meeting the specifi cations on the Batteries page of our
website (http://www.srtorque.com/batteries.html) may cause the tool to become inaccurate.
• Use of any batteries other than those provided by S/R or meeting the specifi cations on the Batteries page of our
website (http://www.srtorque.com/batteries.html) may damage the tool.
• Use of any batteries other than those provided by S/R or meeting the specifi cations on the Batteries page of our
website (http://www.srtorque.com/batteries.html) will void the warranty on the tool.
• Under no circumstances should alkaline batteries, rechargeable or disposable, be used in the tool.
The correct battery and charger pack (NAFTA countries only) for tools in the Exacta
S/R part number 21259. This pack includes a 15-minute charger and four (4) AA NiMH 2200 mAh batteries.
The correct replacement battery pack (NAFTA countries only) for tools in the Exacta
S/R part number 21258. This pack includes four (4) AA NiMH 2500 mAh batteries.
Quick Start Instructions
1100-Series Exacta® 2 Digital Torque Wrench
2 Digital Torque Wrenches are designed to work with the Global 8, Global 8 - Ethernet, RFE
®
Sturtevant Richmont - P/N 857282 Issued 100405 - Page 1 of 4
Sturtevant Richmont
3203 N. Wolf Road, Franklin Park, IL 60131
Phones: 847/455-8677 800/877-1347 Fax: 847/455-0347
E-mail: CustomerService@srtorque.com
Global Reach. Local Support.
URL: www.srtorque.com
2 digital torque wrench line is
®
2 digital torque wrench line is
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Exacta 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sturtevant Richmont Exacta 2

  • Page 1 The correct replacement battery pack (NAFTA countries only) for tools in the Exacta 2 digital torque wrench line is ® S/R part number 21258. This pack includes four (4) AA NiMH 2500 mAh batteries. Sturtevant Richmont - P/N 857282 Issued 100405 - Page 1 of 4...
  • Page 2 The grip is where the tool should be grasped when in use. The load point on the grip is marked by the plain ring in the center of the grip. 6. Battery Compartment Cover The battery compartment cover protects the batteries and associated parts, and permits access for battery replacement. Sturtevant Richmont - P/N 857282 Issued 100405 - Page 2 of 4...
  • Page 3 - cation is attained and while within the specifi cation. It will emit a single longer beep if the torque specifi cation or torque capacity is exceeded. Sturtevant Richmont - P/N 857282 Issued 100405 - Page 3 of 4...
  • Page 4 Factory calibration (with certifi cation from our ISO 17025 Accredited Laboratory) is available, as is factory repair if needed. Simply contact your S/R distributor, or contact us directly using the information on the fi rst page of this document. Sturtevant Richmont - P/N 857282 Issued 100405 - Page 4 of 4...

Table of Contents